Cleaning With Attachments - Bissell 20N4 Series User Manual

O
peration
Carpet cleaning (continued)
9. cleanShot. CleanShot is an optional feature that
can be used to fight tough stains. It can be used as
either a tough stain precleaner (see page 10) or can
be used during the deep cleaning process itself.
To use CleanShot either as a precleaner or during
deep cleaning, follow the instructions below.
a. Set Custom Clean for the desired setting.
b. Press the CleanShot button and aim the
focused stream onto the stain. Allow the
formula to soak in for 30 seconds.
c. Run the machine over the stain to extract.
Repeat as needed until the stain is gone.
D. Rinse if desired.

Cleaning with attachments

your proheat 2X machine comes equipped with
a hose and at least one attachment for cleaning
stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags.
a. Check manufacturer's tag before cleaning.
"W" or "WS" on the tag means you can
use your ProHeat 2X. If the tag is coded
with an "X" or an "S" (with a diagonal stripe
through it), or says "Dry Clean only", do
not proceed with any deep cleaning
machine. Do not use on velvet or silk. If
manufacturer's tag is missing or not coded,
check with your furniture dealer.
b. Check for colorfastness in an inconspicuous
place.
c. If possible, check upholstery stuffing.
Colored stuffing may bleed through fabric
when wet.
D. Plan activities to allow upholstery time to dry.
E. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean in
fabric folds.
w w w . b i s s e l l . c o m
Manufacturer's tag
13