Please Do Not Return This Product To The Store - Bissell 20N4 Series User Manual

T
roubleshooting
Reduce Spray or No Spray (continued)
possible cause
4. Pump may have lost prime.
Dirtlifter powerbrushes do not turn
possible cause
1. The brush belt is off or broken.
2. The unit is in the upright position.
3. Circuit breaker may have tripped.
cleaner not picking up solution
possible causes
1. ReadyTools dial may be at wrong setting.
2. 2-in-1 water tank may not be seated properly.
3. 2-in-1 water tank may not be
assembled properly.
4. Solution or 2-in-1 water tank is empty.
5. 2-in-1 water tank has picked up
maximum dirty water and red float
door has closed.
6. Red float "door" in the tank may have closed
as a result of bumping an object or moving
machine back and forth too quickly.
other maintenance or service not included in the manual should be performed by an
thank you for selecting a bISSEll product.

please do not return this product to the store.

20
w w w . b i s s e l l . c o m
Remedies
4. Turn power off ( O ) and then back
oN ( I ). Wait one minute, then
depress spray trigger.
Remedies
1. Turn power off ( O ) and unplug unit
from outlet. Follow instructions on
page 18 & 19.
2. Brushes only rotate when unit is
reclined using the detent pedal.
3. Turn the machine off ( O ) and
unplug from outlet. Check to see if
foreign object is caught in brush roll.
Remove object. Plug machine back in
to reset circuit breaker.
Remedies
1. Set ReadyTools dial to either FLooR
2. Pick up both the 2-in-1 water
3. Check to make sure the "lip" of
4. Check fluid levels in heavy duty
5. Empty 2-in-1 water tank. Refill
6. Turn the machine off ( O ),
authorized service representative.
CLEANING or TooLS setting.
tank and formula tank and reseat
them so they fit snugly on the unit.
the nozzle is securely hooked
into the groove on bottom of
Tank (see page 10).
bladder and formula tank.
heavy duty bladder with clean
hand hot tap water and replace.
allowing red float door to release into
the open position. Turn unit back
oN ( I ) to continue cleaning. Be
sure your forward and backward
strokes are done at a slower pace.