Subscribe to Our Youtube Channel
Related Manuals for Numark CM1000
Summary of Contents for Numark CM1000
- Page 1 Professional Disc Jockey Products CM1000 CM1000 CM1000 CM1000 CM1000R CM1000R CM1000R CM1000R PROFESSIONAL CLUB MIXER Owner’s Manual...
- Page 2 CM1000/CM1000R ©2000 Industries http://www.numark.com - The Leader in DJ Technology ©2000 Industries - 2 - http://www.numark.com...
-
Page 3: Safety Instructions
Damage Requiring Service - Only qualified personnel should service this product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual. n) Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated. -
Page 5: Very Important
Quality cable makes a big difference in audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get. - Page 6 DJs alike. Its unique and comprehensive set of features makes it a desired choice for professional audio needs. The CM1000 is manufactured utilizing the highest quality audio components and advanced audio circuitry. Featuring inputs for 12 line, 4 phono, and 2 mics with EQ and auto ducking, fader start, along with a complete compliment of balanced outputs, the CM1000 provides users with total control.
- Page 7 CM1000/CM1000R TABLE OF CONTENTS Safety Measures Important Information Registration Introduction Description of the Features Quick Setup Diagram Block Diagram Specifications Warranty - The Leader in DJ Technology ©2000 Industries - 7 - http://www.numark.com...
-
Page 8: Front Panel Features
CM1000/CM1000R FRONT PANEL FEATURES INPUTS HEADPHONE CUEING 1. Input faders - control individual source levels in 9. Channel Cue Assign - are used to route Pre Fader the mix. Level (PFL) channel audio to the Monitor Section. The channel faders do not control the Cue volume. - Page 9 Note: All channels not assigned will remain active. 19. Fader Start – activates the crossfader to send play and cue commands to your auto-start Numark CD player or other popular brand using pulse 26. Power Indication LED – indicates when power is technology.
-
Page 10: Rear Panel Features
CM1000/CM1000R REAR PANEL FEATURES Power Switch – to turn unit on after you have turned on 12. Auto mute level – to set the level of audio reduction with all input devices and before you turn on any devices the auto-talk over is activated on the front panel. -
Page 11: Quick Setup Diagram
CM1000/CM1000R QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. -
Page 12: Block Diagram
CM1000/CM1000R BLOCK DIAGRAM - The Leader in DJ Technology ©2000 Industries - 12 - http://www.numark.com... -
Page 13: Specifications
CM1000/CM1000R SPECIFICATIONS INPUTS: Line: 10kohm input impedance 175mV rms sensitivity (for 1.22V output) Mic: 10kohm input impedance unbalanced 3mV rms sensitivity (for 1.22V output) 85mV rms max input Phantom power: +15V Phono: 47kohm input impedance 1.4mV rms sensitivity @ 1 KHz (for 1.22V output) - Page 14 Limited Warranty on the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer.
Need help?
Do you have a question about the CM1000 and is the answer not in the manual?
Questions and answers