Operating Elements; Software Installation - VOLTCRAFT DL-111K Operating Instructions Manual

• Never disassemble batteries/storage batteries!
• Do not recharge normal batteries. There is a risk of explosion!
• In case of longer periods of non-use (e.g. during storage) remove the inserted battery/accumulator
to avoid damage through leaking batteries.
miscellaneous
• The product must not be used for medical or public purposes.
• Repair works must only be carried out by a specialist/ specialist workshop.
• If you have queries about handling the device, that are not answered in this operating
instruction, our technical support is available under the following address and telephone number:
Voltcraft , 92242 Hirschau, Lindenweg 15, Germany, phone 0180 / 586 582 7.
®
6.

OPERATING ELEmENTS

1 USB plug
2 Data logger button
3 Red LED (ALM)
7.

SOfTWARE INSTALLATION

1. Place the CD included in the delivery in the corresponding drive of your computer.
2. The installation program starts automatically after inserting the CD. Depending on the system and
its setup, you may however have to start the installation manually. For this purpose, start the file
"setup.exe" on the CD.
3. The installation program takes you semi-automatically through the program installation. During
this, you have to accept the license agreement and have the option to define a different installation
directory than the suggested one. Still leave the CD in the drive after installation. The program icon
is created on the desktop ("Type K Temperature Datalogger").
18
4 Green LED (REC)
5 Battery compartment cover
6 Temperature sensor socket