Advertisement
Tough linkage, versatile
hydraulics and PTO
With either 2.9 or 3.3 tonne lift capacity and up to 55 litres of oil
flow at high pressure, the MF 4400 Series is more than a match for
most day-to-day tasks.
Linkage and hydraulics
The rugged linkage, with its top
link sensing draft control system,
provides exceptional ground
contour following and traction for
top quality work.
Control is really simple too, with
simple mechanical levers providing
fast, accurate linkage adjustment.
Standard linkage and hydraulic
system specification includes a
pick-up hitch, heavy-duty, variable
float telescopic stabilisers and two
spool valves with
joystick control.
Electronic Linkage Control (ELC)
For simplicity and even greater
accuracy, ELC is available as
an option. This also brings
08
additional features, including
Active Transport Control, which
enables faster, safer transport
of linkage-mounted equipment
by reducing implement bounce
and pitching. Fender-mounted
switches also provide convenient
linkage adjustment for fast, easy
implement attachment.
High-power PTO
The simple PTO drive design
incorporates just a single set of
transfer gears between the engine
and PTO shaft. So power losses
are very low, achieving maximum
power at the PTO shaft. A choice
of 540/540 Economy (750) rpm
or 540/1000 rpm is available;
both with simple, mechanically
controlled clutch with a lever to
the left of the instrument console.
Electro-hydraulic PTO
engagement
Ideal for use in applications
requiring frequent engagement
and disengagement of the PTO
or where the convenience of
switch operation is preferred,
an electro-hydraulic PTO
system is available. Activated
by a 'B' post-mounted
switch, the system provides
hydraulic operation of the
existing mechanical clutch,
reducing fatigue and improving
productivity in PTO work.
Advertisement
