Advertisement
Note: DO NOT PRESS the port 1 button for 3 seconds or longer on any slave
switch because this will initialize only the switches downstream from this slave
switch.
10. Turn ON the connected
computers one-by-one and wait
until each computer's desktop
appears.
Rack Mount
The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which
can be placed in a wiring closet with other equipment.
Note: If you would like to mount the KVM switch to a EIA 19" equipment rack,
install the included mounting brackets to the sides of the KVM switch, secure
them with the screws provided, and then mount the KVM switch to the
equipment rack with the hardware provided by the equipment rack
manufacturer.
11. Attach the mounting brackets to
both sides of the switch and
secure them with the provided
screws.
12. Carefully position the switch onto
the rack. Align the bracket to the
screw holes on the rack, then use
the screws provided with the
equipment rack to mount the
switch.
Your installation is now complete.
English
4
Advertisement
