Features; Poe Features - NETGEAR FS728TPv2 Hardware Installation Manual

Smart poe switch
Hide thumbs Also See for FS728TPv2:
Table of Contents

Advertisement

FS728TP Hardware Installation Guide

Features

The following list identifies the key features of the FS728TP:
24-port Fast Ethernet Smart Switch with 24 PoE ports with 2 combo ports and 2 Gigabit
copper uplinks.
Four 10/100/1000 Gigabit Ethernet switching ports.
Two 1000M SFP Gigabit Ethernet switching ports.
Full NETGEAR Smart Switch functionality.
Full compatibility with IEEE standards:
IEEE 802.3 CSMA/CD
IEEE 802.3i (10BASE-T)
IEEE 802.3u (100BASE-TX)
IEEE 802.3x (Full-duplex flow control)
IEEE 802.3ab (1000BASE-T)
IEEE 802.3z (1000BASE-x)
IEEE 802.3af (DTE power via MDI)
Autosensing and auto-negotiating capabilities for all ports.
Auto Uplink™ on all ports to make the right connection.
Automatic address learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
Store-and-Forward transmission to remove bad packets from the network.
Full-duplex IEEE 802.3x pause frame flow control.
Active flow control to minimize packet loss and frame drops.
Half-duplex backpressure control.
Per port LEDs, power LED, PoE Max, and fan.
Standard NETGEAR 7xx series chassis.
NETGEAR Green product features.

PoE Features

The FS728TP supports IEEE 802.3af PSE features:
Ports 1 through 24 support IEEE 802.3af, Alternative A (MDI-X). The total PoE power
budget is 192 Watts, with a maximum of 15.4 Watts per PoE port.
PoE is enabled by default.
Chapter 1: Introduction
| 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs728tp

Table of Contents