2. After the hardware installation is com pleted, power on the system and install the
NVIDIA ForceWare Windows Vista driver. Reboot the system, a NVIDIA Control Panel
will be provided for Multi-GPU control. Right click on windows desktop and select
NVIDIA Control Panel. Go to 3D Settings --> Set SLI configuration and check Enable
SLI technology (recommended). Then press Apply. (concerning the details of multi-
GPU settings, please refer to your graphics card manual).
Check the box
3. Go to 3D Settings on the top menu options, and check the Show SLI Visual
Indicators. It will show the SLI x3 lable and a scaling bar in fullscreen 3D
applications.
Important
If you want to quit the SLI function, make sure that you disable the "SLI
technology" function.
En-17