M S-7510 M ainboard
Important
1. Mainboard photos shown in this section are for demonstration only. The
appearance of your mainboard may vary depending on the model you purchase.
2. If you intend to install only ONE x16 graphics card, please install this
graphics card in mazarine PCIE x16 (PCI_E1) slot to run full x16 speed.
3. If you wish to use 2-way SLI, you must install the two graphics cards in
mazarine PCIE x16 slots (PCI_E1 & PCE_E4). Then, connect two graph-
ics cards together using the 2 SLI bridge short cables (Fig.2). And remem-
ber to enable the SLI technology function as the following step 2 & step 3.
4. 3-Way SLI technology supports Windows
Fig.2 2-Way SLI Bridge cables connection
En-16
®
Vista only.