Mapping - RME Audio Hammerfall Hammerfall DSP System User Manual

When Full LC Display Support is turned off, only a brief information about the first fader of the
block (channel and row) is sent. This brief information is also available on the LED display of
the Behringer BCF2000.
Tip for Mac OS X users: LC Xview (www.opuslocus.com) provides an on-screen display
emulating the hardware displays of a Logic/Mackie Control, for use with controllers that can
emulate a Logic/Mackie Control but do not have a display. Examples include the Behringer
BCF2000 and Edirol PCR series.
Deactivate MIDI in Background (menu Options) disables the MIDI control as soon as another
application is in the focus, or in case TotalMix has been minimized. This way the hardware con-
troller will control the main DAW application only, except when TotalMix is in the foreground.
Often the DAW application can be set to become inactive in background too, so that MIDI con-
trol is switched between TotalMix and the application automatically when switching between
both applications.
TotalMix also supports the 9th fader of the Mackie Control. This fader (labeled Master) will con-
trol the stereo output faders (lowest row) which are set up as Main Monitor outputs in the Moni-
tor panel. Always and only.

27.4 Mapping

TotalMix supports the following Mackie Control surface elements*:
Element:
Channel faders 1 – 8
Master fader
SEL(1-8) + DYNAMICS
V-Pots 1 – 8
pressing V-Pot knobs
CHANNEL LEFT or REWIND
CHANNEL RIGHT or FAST FORWARD
BANK LEFT or ARROW LEFT
BANK RIGHT or ARROW RIGHT
ARROW UP or Assignable1/PAGE+
ARROW DOWN or Assignable2/PAGE-
EQ
PLUGINS/INSERT
STOP
PLAY
PAN
MUTE Ch. 1 – 8
SOLO Ch. 1 – 8
SELECT Ch. 1 – 8
REC Ch. 1 – 8
F1 - F8
F9
F10 - F12
*Tested with Behringer BCF2000 Firmware v1.07 in Mackie Control emulation for Steinberg mode and with Mackie
Control under Mac OS X.
62
Meaning in TotalMix:
volume
Main Monitor channel's faders
reset fader to Unity Gain
pan
pan = center
move one channel left
move one channel right
move eight channels left
move eight channels right
move one row up
move one row down
Master Mute
Master Solo
Dim Main Monitor
Talkback
Mono Main Monitor
Mute
Solo
Select
in Submix mode only: select output bus
load preset 1 - 8
select Main Monitor
Monitor Phones 1 - 3
User's Guide HDSP MADI © RME