Memorex MC-2851 Operating Instructions Manual page 10

MC2851 O/M.QXD 8/17/01
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
1
Press the POWER button
unit on; the POWER indicator will light.
Slide the FUNCTION switch
CD position. Press the PROG button
once; "P 01:" will appear in the display
and the PROGRAM indicator will blink.
3
Press the PLAY/PAUSE (
to begin playback. The unit will play all
the tracks in
programmed them.
NOTES:
• To skip forward or backward through the programs, press the CD Skip
or button. When the disc is through playing, it will stop.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Press the REPEAT button twice before pressing the PLAY/PAUSE (
button to begin Program playback to activate Repeat All playback.
FAQS: How do I clear the memory?
Press the PROGRAM button to enter the Program mode, and then
press the STOP ( ) button or change the position of the FUNCTION switch.
1:10 PM Page 10
OPERATION (CONTINUED)
2
3
to turn the Within 7 seconds, select the first track
to be played back using the CD Skip
to the
PROG button
step to program additional tracks up to
a maximum of 20 tracks.
) button Adjust the VOLUME control
When the disc is through playing, it will
stop. Press the STOP ( ) button
the order you
stop the disc before it is finished.
10
2
1
2
or button , then press the
again. Repeat this
4
1
1
2
as desired.
to
)