Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 44

For more information on the Self-Signed Certificates, see
Certificate," on page
12 If you chose to use an existing database, continue with
or
If you chose to install and set up a local PostgreSQL database, skip to
13 Provide the appropriate responses to the following prompts to configure access to an existing
database:
IP address or hostname of the database server: Enter the IP address or DNS hostname
of the server hosting the database.
Port database is listening on: Enter the listening port being used by the database server.
The default PostgreSQL listening port is 5432. The default Oracle listening port is 1521.
Database name/SID: For a PostgreSQL database, enter the name of the database. For an
Oracle database, enter the SID (System Identifier).
Database user name: Enter the user name for an administrative account that provides full
access to the database.
Database user password: Enter the account password.
14 When configuration of the ZENworks Server components is complete, you should verify the
installation. To do so:
14a Confirm that the ZENworks services are running by using the following command:
/opt/novell/zenworks/bin/zlm-config --status
The screen output should show that all services are running.
Novell ZENworks Imaging Service is running
Novell eDirectory is running
Novell ZENworks Server Management is running
Novell ZENworks Imaging Agent is running
Novell ZENworks Server is running
Novell ZENworks Preboot Policy Daemon is running
Novell ZENworks Management Daemon is running
Novell ZENworks Loader is running
If a service is not running, use the following command to start it:
/etc/init.d/servicename start
Replace servicename with the name of the service that needs to be started.
Service
Novell eDirectory
Novell ZENworks Server
Novell ZENworks Loader
Novell ZENworks Imaging Service
Novell ZENworks Preboot Policy Daemon
Novell ZENworks Server Management
44 Novell ZENworks 7.3 Linux Management Installation Guide
127.
Section A.7, "Adding a Third-Party
Step 13.
Step
Service Name
ndsd
novell-zenserver
novell-zenloader
novell-pbserv
novell-zmgprebootpolicy
novell-zented
14.