Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 Installation Manual page 51

8a On the Handheld Configuration page, type the computer name or IP address of the
ZENworks Handheld Management Server (or the computer on which you installed the
ZENworks Handheld Management Access Point).
If you are using an IP address to specify the location of the ZENworks Handheld
Management Server (or ZENworks Handheld Management Access Point, if it is installed
on a computer other than the server), the IP address of the computer should remain
constant (for example, it doesn't change because of DHCP).
8b (Optional) Select the Enable HTTP Encapsulation option.
8c (Optional) Select the Enable SSL option.
8d (Optional) If you want to change the default ports that ZENworks Handheld Management
use, deselect the Use Default Ports option, then type the desired port number in the TCP
Port and SSL Port text boxes.
If you change these port numbers, you must also change them at the computer where the
ZENworks Handheld Management Access Point is installed (the ZENworks Handheld
Management Server or the computer on which you installed the ZENworks Handheld
Management Access Point).
8e Click Next.
9 On the Connections Options page, do the following:
Installing ZENworks Handheld Management 51