Testing The Spoon Standalone Setup - Novell ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE Manual

/au: The URL to the model file for a streamed application or to the
streamed application.
Streamed Application Example:
1.0.0.0__0/xstream/0/model.xm
Non-Streamed Application Example:
1.0.0.0__0/myapp.svm
/vm: The version information for
To locate the version number, from the extracted
layers
replace it in the command line as
/xvm: The URL to the
/xreg: The URL to the
NOTE: The
version and revision.
/o: The output file.
The following is an example of the command line syntax that was used to create a GroupWise
application configuration file.
C:\inetpub\wwwroot>LicenseUtil-Novell.exe CreateAppConfig /pc c:\bh\Zav8-
Internal-Spoon Certs\ZAV80-NOV-0000#.xml /an groupwise /av 8.0.1.0;0;0 /au
http://164.99.186.184/spoon/layers/groupwise/8-0-1-0__0/xtream/0/model.xm /
xvm http://164.99.186.184/config/xvm.xml /spoonreg http://164.99.186.184/
spoon/config/spoonreg.xml /vm 8.0.1236.1;0 /o groupwise.xml
After you generate the configuration file, save it in a convenient location on the Web server, for
example,
http://site/site_root/configs/

6.2.6 Testing the Spoon Standalone Setup

Testing the ZENworks Application Virtualization Streaming Server setup involves installing the
Spoon plug-in and launching an application. This section includes the following information:
"Testing the Plug-in Install" on page 32
"Testing the Application Launch" on page 33
"Troubleshooting an Application That Fails to Buffer" on page 33
Testing the Plug-in Install
1 (Conditional) On the Windows desktop, click Start > Control Panel > Add or Remove
Programs, select Spoon Sandbox Manager, then click Remove.
Repeat this step to remove all previous installations (versions) of the Spoon Sandbox Manager.
NOTE: Although this step is unnecessary for end-users, it helps you to ensure that the plug-in
installer is correctly referenced.
2 Use a Web browser to navigate to
32 Novell ZENworks Application Virtualization 8.0.3 Integration and Streaming Guide
, select either or
xreg xvm
configuration file.
.xvm
configuration file.
.xreg
version and revision information is assumed to be identical to the
spoonreg
http://www.mysite.com/layers/myapp/
http://www.mysite.com/layers/myapp/
xvm.exe version;revision
StandaloneTemplate.zip
folder. Copy the directory name
8.1.1398.1;0
.
. For example,
plugin-check.html
file for a non-
.svm
, such as
8.1.1398.1;0
folder, go to
and
8-1-1398-1__0
xvm