Testing The Spoon Standalone Setup - Novell ZENWORKS APPLICATION VIRTUALIZATION 8.0 - INTEGRATION AND STREAMING GUIDE 05-07-2010 Manual

Table of Contents

Advertisement

C:\inetpub\wwwroot>LicenseUtil.exe CreateAppConfig /pc c:\bh\Zav8-Internal-
Spoon Certs\ZAV80-NOV-0000#.xml /an groupwise /av 8.0.1.0;0 /au http://
164.99.186.184/spoon/layers/groupwise/8-0-1-0__0/xtream/0/model.xm /xvm
http://164.99.186.184/config/xvm.xml /xreg http://164.99.186.184/spoonconfig/
xreg.xml /vm 8.0.1236.1;0 /o groupwise.xml
After you generate the configuration file, you need to keep it in a convenient location on the Web
server, for example,

6.2.5 Testing the Spoon Standalone Setup

This section includes the following information:
"Testing the Plug-in Install" on page 34
"Testing the Application Launch" on page 34
"Troubleshooting an Application That Fails to Buffer" on page 35
Testing the Plug-in Install
Use the following steps to test the Spoon plug-in installation.
1 (Conditional) From the Windows desktop, click Start > Control Panel > Add or Remove
Programs, select Spoon Sandbox Manager, then click Remove.
Repeat this step to remove all previous installations (versions) of the Spoon Sandbox Manager.
NOTE: Although this step is unnecessary for end-users, it helps you to ensure that the plug-in
installer is correctly referenced.
2 From a Web browser, navigate to
http://www.mysite.com/spoon/plugin-check.html
3 Install the plug-in.
Testing the Application Launch
Use the following steps to test the application launch.
1 From a text editor, open
the application configuration files available on the Web server.
2 From a Web browser, navigate to
The page then redirects to
NOTE: The application configuration file is cached by the plug-in for up to 15 minutes. If the
application configuration is changed, it is best to restart the Spoon plug-in (select Start > All
Programs > Startup > Spoon Sandbox Manager) before retesting.
34
Novell ZENworks Application Virtualization 8.0 Integration and Streaming Guide
http://site/site_root/configs/
plugin-check.html
and edit the
launch.html
plugin-check.html
launch.html
.
. For example,
Spoon_Config
.
. The application buffers and then launches.
variable to reference one of

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zenworks application virtualization 8.0

Table of Contents