Novell OPEN ENTERPRISE SERVER 2 SP2 - LINUX TIPS FOR NETWARE ADMINISTRATORS Manual page 35

NetWare Command Purpose or Subcommand
NWCONFIG Manage the server and
install additional products.
Ping a remote host from a
NWPING
NetWare server.
NWTRACE Print the route that packets
take to the network host.
NWTRAP Manage SNMP traps on
NetWare.
OFF Clear the console screen.
ORBD Enable clients to
transparently locate and
invoke persistent objects
on servers in the CORBA*
environment.
PAUSE Cause NCF file execution
to wait for a key to be
pressed.
POLICYTOOL Create a manage policy
files for Java.
Send an Internet Control
PING
Message Protocol (ICMP)
echo request packet to an
IP node on your
internetwork.
View Point-to-Point
PPPCON
Protocol (PPP) interface
configuration and
statistical information.
Linux Command
Alternatives and Notes
Counterpart
yast YaST is the tool for installing OES-
Linux and OES services. Many
configuration parameters are similar
to NetWare.
For help with YaST, enter
at the command prompt.
For more information, see the
ping
man page.
traceroute For more information, see the
traceroute
net-snmp For more information, see the
respective man pages.
net-snmp-
utils
clear For more information, see the
clear man page.
Ctrl+l
orbd For more information, see the
man page.
— There is no simple command or
switch to enable pausing in shell
script file execution.
To enable manual confirmation of
steps in the server boot process,
edit
/etc/sysconfig/boot
change the
PROMPT_FOR_CONFIRM
parameter to yes.
For information about script files,
see Section 3.2, "NCF vs. Shell
Script Files," on page
policytool For more information, see the
policytool
For more information, see the
ping
man page.
Point-to-Point interfaces are
yast
configured in YaST > Network
Devices.
For help with YaST, enter
at the command prompt.
yast -h
ping
man page.
orbd
and
49.
man page.
ping
yast -h
NetWare/Linux Command Map 35