Novell OPEN ENTERPRISE SERVER 2 SP2 - LINUX TIPS FOR NETWARE ADMINISTRATORS Manual page 27

NetWare Command Purpose or Subcommand
KF8 Enable or disables
pausing between
commands executed from
NCF files.
LANGUAGE Set the language for
subsequently loaded
modules.
Mount all local FAT
LFVMOUNT
volumes not recognized by
DOS and assign them a
local drive letter.
List the local FAT volumes
LFVOLUMES
currently mounted.
List the storage devices on
LIST DEVICES
the server and register
new devices with the
server's Media Manager
database.
Linux Command
Alternatives and Notes
Counterpart
— There is no simple command or
switch to enable pausing in script
file execution.
To enable manual confirmation of
steps in the boot process, edit
etc/sysconfig/boot
change the
PROMPT_FOR_CONFIRM
to
"yes"
For information about script files,
see Section 3.2, "NCF vs. Shell
Script Files," on page
yast All language settings are managed
using YaST.
For help with YaST, enter
at the command prompt.
Parameters specified with the
mount
command determine the file
mount
systems mounted and attributes
associated with the file systems.
Drive letters are not used on Linux.
For more information, see the
mount man page.
Used alone, the
mount
shows the currently mounted
volumes.
Linux has many devices, each of
cat /dev/
which contains information you can
device
view by "walking the /proc file
ls /dev
system."
yast
Understanding Linux devices and
the information displayed requires
training beyond of the scope of this
guide. For more information, see
the SLES 10 SP2 Installation and
Administration
To display the currently mounted file
systems, enter the
command with no arguments.
You can display partitions in YaST >
System > Partitioner, but be careful
to exit without making changes.
For help with YaST, enter
at the command prompt.
/
and
parameter
.
49.
yast -h
command
mount
Guide.
mount
yast -h
NetWare/Linux Command Map 27