Starting The Install Process - Novell LINUX ENTERPRISE SERVER STARTER SYSTEM Installation Manual

NOVSTART 19F also contains some helpful tools for starting the installation process:
SLES
SWAPGEN SWAPGEN provides a simple method of formatting and utilizing virtual
These tools should be available to all Linux guests installed from the starter system.

Starting the Install Process

To start the install, follow these steps:
The remainder of the installation process will proceed as described in the Novell doc-
umentation. You should respond to the prompts similar to the following:
30
Installing the SUSE Linux Enterprise Server Starter System for System z
A link to NOVSTART 19F (installation and helpful operations tools)
A link to MAINT 190 (for use by CMS)
Comments on recommended minidisk sizes and virtual address patterns.
– 0191 (for CMS startup and configuration use)
– 0150-015F (Linux disks)
– 0160-016F (Swap space, created via DEFINE VDISK or SWAPGEN)
– 0170-017F (Additional Linux disks if needed)
Actual minidisks should be added using your local directory maintenance procedures.
Run this EXEC to send the standard installation kernel text decks to the
virtual reader of the new guest and IPL from the virtual reader. This EXEC
should be run from the new virtual machine you are installing.
The SLES exec can also be used to start a damaged system to effect repairs.
disk in memory (VDISK) for Linux swap space.
1. Create a new z/VM userid based on CLIENT SAMPDIR (as described above).
2. Log in as the new z/VM userid via tn3270.
3. Format the minidisk at virtual address 0191 by typing:
FORMAT 191 A
The label of the minidisk is not important.
4. Access NOVSTART 19F by typing ACCESS 19F Q
5. Copy the sample PROFILE EXEC from NOVSTART 19F by typing:
PROFILE SAMPEXEC Q PROFILE EXEC A
6. Start the installation process by typing SLES
The install process will begin.
Select 4) Start Installation of System
Select 1) Start Installation or Update
Select 2) Network
Select your desired installation method (see "Specifying the Install Server Address
and Install Method" on page 31)
Select 1) OSA-2 or OSA Express as the network device.
COPYFILE