Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Administration Manual page 85

5c Under New Partition Size, specify to use the maximum size, then click Next.
5d Under Format Options, select Do not format partition, then select 0xFD Linux RAID from
the drop-down list.
5e Under Mount Options, select Do not mount partition.
5f Click Finish.
5g Repeat Step 5a to
6 Create the RAID device.
6a In the System View panel, select RAID, then click Add RAID on the RAID page.
The devices that you prepared in
6b Under RAID Type, select RAID 0 (Striping), RAID 1 (Mirroring), or RAID 5 (Redundant
Striping).
For example, select RAID 1 (Mirroring).
6c In the Available Devices panel, select the devices you want to use for the RAID, then click
Add to move the devices to the Selected Devices panel.
Specify two or more devices for a RAID 1, two devices for a RAID 0, or at least three
devices for a RAID 5.
To continue the example, two devices are selected for RAID 1.
Step 5f for each device that you plan to use in the software RAID
Step 5 are listed in Available Devices.
Configuring Software RAID for the Root Partition 85