Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Administration Manual page 111

To install iSNS for Linux:
1 Start YaST and select Network Services > iSNS Server.
2 When prompted to install the
3 Follow the install dialog instructions to provide the SUSE Linux Enterprise Server 11
installation disks.
When the installation is complete, the iSNS Service configuration dialog opens automatically
to the Service tab.
4 In Address of iSNS Server, specify the DNS name or IP address of the iSNS Server.
5 In Service Start, select one of the following:
When Booting: The iSNS service starts automatically on server startup.
Manually (Default): The iSNS service must be started manually by entering
or
start /etc/init.d/isns start
it.
6 Specify the following firewall settings:
Open Port in Firewall: Select the check box to open the firewall and allow access to the
service from remote computers. The firewall port is closed by default.
Firewall Details: If you open the firewall port, the port is open on all network interfaces
by default. Click Firewall Details to select interfaces on which to open the port, select the
network interfaces to use, then click OK.
7 Click Finish to apply the configuration settings and complete the installation.
8 Continue with Section 12.3, "Configuring iSNS Discovery Domains," on page
package, click Install.
isns
at the server console of the server where you install
rcisns
112.
iSNS for Linux 111