February 23, 2010; Configuring Software Raid For The Root Partition; Managing Multipath I/O; A.1.2 Managing Multipath I/O - Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Administration Manual

Documentation Updates
A
This section contains information about documentation content changes made to the SUSE Linux
Enterprise Server Storage Administration Guide since the initial release of SUSE
Server 11. If you are an existing user, review the change entries to readily identify modified content.
If you are a new user, simply read the guide in its current state.
This document was updated on the following dates:
Section A.1, "February 23, 2010," on page 135
Section A.2, "January 20, 2010," on page 136
Section A.3, "December 1, 2009," on page 136
Section A.4, "October 20, 2009," on page 137
Section A.5, "August 3, 2009," on page 138
Section A.6, "June 22, 2009," on page 138
Section A.7, "May 21, 2009," on page 139
A.1 February 23, 2010
Updates were made to the following sections. The changes are explained below.
Section A.1.1, "Configuring Software RAID for the Root Partition," on page 135
Section A.1.2, "Managing Multipath I/O," on page 135
A.1.1 Configuring Software RAID for the Root Partition
Location
"Prerequisites for the Software RAID" on
page 83

A.1.2 Managing Multipath I/O

Location
"Scanning for New Devices without
Rebooting" on page 71
"Scanning for New Partitioned Devices
without Rebooting" on page 73
Change
Corrected an error in the RAID 0 definition..
Change
Added information about using the
script to scan for devices without rebooting.
Added information about using the
script to scan for devices without rebooting.
®
Linux Enterprise
rescan-scsi-bus.sh
rescan-scsi-bus.sh
Documentation Updates
A
135