Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 08-05-2008 Installation Manual page 579

30.4.1 Configuring the Network Card with
YaST
To configure your network wired or wireless card in YaST, select Network Devices >
Network Card. After starting the module, YaST displays a general network configuration
dialog. Choose whether to use YaST or NetworkManager to manage all your network
devices. If you want to configure your network in the traditional way with the YaST,
check Traditional Method with ifup and click Next. To use NetworkManager, check
User Controlled with NetworkManager and click Next. Find detailed information about
NetworkManager in Section 30.5, "Managing Network Connections with NetworkMan-
ager" (page 579).
NOTE: Network Method and Xen
NetworkManager does not work with Xen. Only Traditional Method with ifup
is available in Xen.
The upper part of the next dialog shows a list with all the network cards available for
configuration. Any card properly detected is listed with its name. To change the confi-
guration of the selected device, click Edit. Devices that could not be detected can be
configured using Add as described in
Card" (page 567).
Section "Configuring an Undetected Network
Basic Networking 561