Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 08-05-2008 Installation Manual page 169

To configure your mouse for the text environment, use YaST in text mode. After entering
text mode and selecting Hardware > Mouse Model, use the keyboard arrow keys to
choose your mouse from the provided list. Then click Accept to save the settings and
exit the module.
8.4.12 Sound
Most sound cards are detected automatically and configured with reasonable values
during initial installation. To install a card added later or modify settings, use Hardware
> Sound. It is also possible to switch the sequence of the cards.
Figure 8.5 Sound Configuration
If YaST cannot detect your sound card automatically, proceed as follows:
1 Click Add to open a dialog in which to select a sound card vendor and model.
Refer to your sound card documentation for the information required. Find a
reference list of sound cards supported by ALSA with their corresponding sound
modules in /usr/share/doc/packages/alsa/cards.txt and at
http://www.alsa-project.org/alsa-doc/. After making your se-
lection, click Next.
System Configuration with YaST 151