Novell LINUX ENTERPRISE DESKTOP 11 - APPLICATION GUIDE 17-03-2009 Application Manual page 251

2 Use the mouse cursor to select the area to which to apply the fix.
3 Select Enhance > Inpainting or press Ctrl + E .
4 Determine the method to use to remove the artifact:
• Choose one of the preset options (Remove Small Artifact, Remove Medium
Artifact, or Remove Large Artifact) and proceed with
• Set the filter parameters on your own. Proceed with
5 If you opted against using any of the preset filters (in the Preset tab), open the
General and Advanced Settings tabs and adjust the settings to your needs.
6 Click OK to apply your settings and modify the image accordingly.
TIP: Creating and Reusing Your Own Filter Settings
If you need to use the same set of settings more than once, for example,
if a scratch on the lens ruined an entire series of images, create your set
of filter settings. Save them for later use by clicking Save As and saving
them to a text file. For subsequent images, open the Image Inpainting
dialog, click Load, then select the text file and apply the filter settings
with OK.
Figure 21.5 Using Inpainting to Remove Artifacts
Managing Your Digital Image Collection with DigiKam
Step 6.
Step 5.
237