Creating An Audio Cd - Novell LINUX ENTERPRISE DESKTOP 11 - APPLICATION GUIDE 17-03-2009 Application Manual

ered the best suited method. The Multisession Mode is used to append data to an already
written but not finalized medium.
After adjusting all settings to your needs, start the actual burning process using Burn.
Alternatively, save these settings for future use and adjustment with Save.

26.2 Creating an Audio CD

Basically, there are no significant differences between creating an audio CD and creating
a data CD. Select File > New Audio CD Project. Drag and drop the individual audio
tracks to the project folder. The audio data must be in WAV or Ogg Vorbis format.
Determine the sequence of the tracks by moving them up or down in the project folder.
With the help of CD Text, you are able to add certain text information to a CD, such as
CD title, artist name, and track name. CD players that support this feature can read and
display this information. To add CD text information to your audio tracks, select the
track first. Right-click and select Properties and enter your information in the new
window that opens. You can also download track information from the Internet by
clicking Query Cddb.
The dialog for burning an audio CD is not very different from the dialog for burning a
data CD. However, the Disk at Once and the Track at Once modes have greater impor-
tance. In TAO mode the laser stops after each track and leaves a short break. The DAO
mode uses one uninterrupted session and writes data to your disk sequentially. The
Track at Once mode inserts an intermission of two seconds after each track.
TIP: Preserving Data Integrity
When burning audio CDs, choose a lower burning speed to reduce the risk of
burning errors.
After adjusting all settings to your needs, start the actual burning process using Burn.
Alternatively, save these settings for future use and adjustment by clicking on the
floppy disk icon.
308 Application Guide