Single-Server Cluster Deployment; Planning - Novell IFOLDER 3.8 - DEPLOYMENT Deployment Manual

Single-Server Cluster Deployment

6
Cluster-enabling the Novell
any time. If your organization is deploying only one iFolder server for the iFolder service, you
should enable a server cluster. This scenario is illustrated in the following figure.
Single-Server Cluster
Figure 6-1
Open Enterprise Server (OES) 2 SP2 provides iFolder service migration scripts that are based on
Novell Cluster Services
TM
for re-migration to the actual node when the node recovers from failure (failback).
This configuration ensures that the iFolder service is always available during unforeseen node
failures in a cluster environment.
The following sections describe a single-server cluster deployment.
Section 6.1, "Planning," on page 31
Section 6.2, "Key Benefits," on page 32
Section 6.3, "LDAP Configuration," on page 32
Section 6.4, "Scalability Parameters," on page 32
Section 6.5, "Deployment Scenarios," on page 32

6.1 Planning

Section 6.1.1, "iFolder Configuration," on page 32
® ®
iFolder service enables the iFolder server to be highly available at
, for automatic service migration from one node to another (failover) and
Single-Server Cluster Deployment
6
31