Assigning A Default Webaccess Agent To A Domain - Novell GROUPWISE 8 - WEBACCESS Manual

3 Select the Override box to turn on the option.
4 In the Default WebAccess Gateway box, browse for and select the WebAccess Agent that you
want to assign as the default agent.
When you have multiple WebAccess Agents and a user logs in to GroupWise WebAccess, the
GroupWise Application running on the Web server checks to see if a default WebAccess Agent
has been assigned to the user's post office. If so, the WebAccess Application connects to the
assigned WebAccess Agent. If not, it connects to the default WebAccess Agent assigned to the
post office's domain, as described in
a Domain," on page 888
described in
List," on page
office to ensure the best performance.
5 Click OK to save the changes.

53.3.5 Assigning a Default WebAccess Agent to a Domain

The WebAccess Application uses the domain's default WebAccess Agent if 1) no WebAccess Agent
has been specified in the WebAccess URL (see
the WebAccess URL," on page
post office, or 3) neither of those WebAccess Agents are available. This applies only if you have
multiple WebAccess Agents installed in your GroupWise system. If you have only one WebAccess
Agent, it services users in all domains.
To assign a default WebAccess Agent to a domain:
1 In ConsoleOne, right-click the Domain object, then click Properties.
2 Click GroupWise > Default WebAccess to display the Default WebAccess page.
888 GroupWise 8 Administration Guide
Section 53.3.5, "Assigning a Default WebAccess Agent to
or to one of the WebAccess Agents in its service provider list, as
Section 53.3.6, "Adding WebAccess Agents to the GroupWise Service Provider's
889. If possible, select a WebAccess Agent that has good access to the post
886), 2) no default WebAccess Agent has been defined for the user's
Section 53.3.3, "Specifying a WebAccess Agent in