Planning The Location Of The Domain Database Backup Directories; Planning Groupwise System Connections; Section 9.4, "Planning The Location Of The Domain Database Backup Directories; Section 9.5, "Planning Groupwise System Connections - Novell GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION Manual

9.4 Planning the Location of the Domain
Database Backup Directories
Because the domain database is critical to the performance of GroupWise, you should always create
a backup copy of the domain databases you will be manipulating. This ensures that an original
version of each database is available should you make a mistake, or if any problems should arise
during the merge process. You can always return to the former configurations while you correct any
problems encountered.
WORKSHEET
Under
Under
Under
to hold the backup copy of the Site #1 domain database.
Under
create to hold the backup copy of a Site #2 domain database. Every domain database has the same
name, so plan to either temporarily rename the database copies or to create separate directories for
them.

9.5 Planning GroupWise System Connections

The merge cannot occur unless Site #1 is able to make a direct connection to the Site #2 domain
being merged. You should have direct system connections established between Site #1 and Site #2
so that you can open the databases. If you are able to connect to Site #2 and have appropriate rights,
you can create external domains, release secondary domains, and merge domains in the GroupWise
View.
If you cannot open the domain databases to be merged (you do not have the necessary rights and/or
the systems cannot be connected), you need to use copies of each Site #2 domain database for
making the direct connections.
So that the database copies will accurately mirror the live databases, you and the other GroupWise
administrator involved with the merge should avoid making any administrative changes in
GroupWise after you have made the copies of the Site #2 databases. GroupWise clients can function
in the two systems while you run the merge against the copy.
If you are the Site #1 administrator, you create directories for the Site #2 database copies (both the
original Site #2 primary domain and the newly-released Site #2 domain databases). During the
merge process, you target each of these directories to merge that domain to the Site #1 system.
When the merge process is completed, you copy the merged database copies over the live databases.
If you want to merge systems that are connected through a GroupWise gateway, you should treat the
systems as if they are not connected. This is because the merge requires use of external domains.
54 GroupWise 7 Multi-System Administration Guide
Item 15: Paths to Site #1 wpdomain.dbs, enter paths to the Site #1 wpdomain.db files.
Item 6: Paths to Site #2 wpdomain.dbs, enter paths to the Site #2 wpdomain.db files.
Item 24: Paths to Site #1 Backup
Item 25: Paths to Site #2 Backup
Directories, enter the path to the backup directory you will create
Directories, enter the path to each backup directory you will