Setting The Sadmin Password On Netware; Setting The Sadmin Password On Windows - Novell EDIRECTORY 8.8 - ADMINISTRATION Manual

17.6.1 Setting the SAdmin Password on NetWare

Use NetWare Remote Manager to enable the SAdmin User object and set or change the password
for this object. httpstk.nlm must be running on the eDirectory server in order for you to set or change
the SAdmin password.
1 Open a Web browser.
2 In the address (URL) field, enter the following:
3 Specify a username, context, and password.
4 Click the Configure button
5 Specify an SAdmin password, then verify the password you just specified.
6 Click Set.

17.6.2 Setting the SAdmin Password on Windows

Use the DHOST remote manager page (accessible through the /dhost URL or from the root page) to
set the SAdmin password. dhost.exe must be running on the eDirectory server in order for you to set
or change the SAdmin password.
1 Open a Web browser.
2 In the address (URL) field, enter the following:
3 Specify a username, context, and password.
4 Click HTTP Server, then specify an SAdmin password.
5 Verify the password you just specified, then click Submit.
528 Novell eDirectory 8.8 Administration Guide
http://server's TCP/IP address:port
For example:
http://137.65.123.11:8028
NOTE: The default alternate port number is 8028. If you have changed this value on the
Configuration page in NetWare Remote Manager, make sure you enter the new port number.
If you have Domain Name Services (DNS) installed on your network for server name-to-IP
address resolution, you can also enter the server's DNS name instead of the IP address.
Password.
http://server.name:port/dhost
for example:
http://MyServer:80/dhost
You can also use the server IP address to access the DHost iConsole. For example:
http://137.65.135.150:80/dhost
> Enable Emergency Account (SADMIN User) and Set