Novell ACCESS MANAGER 3.1 SP1 Installation Manual page 33

4 Fill in the following fields:
Enable On Box Identity Server: This option is not available in this release.
Enable On Box Administration Server: This option is not available in this release.
Enable On Box SSL VPN Server: Do not select this option.
Access Administrator IP Address: Specify the address of the Administration Console.
Access Gateway IP Address: Specify the IP address of the RHEL server from the drop-down
list.
Username: Specify the name of the Administration Console user.
Password: Specify the password for the user.
Reenter Password: Re-type the password for the user.
5 Tab to Next, then press Enter.
6 Tab to Next, then press Enter.
7 The Add a new local user screen appears. Select Next.
8 When the Empty user login prompt is shown, select Yes.
9 On the Hardware configuration option, select Next.
The final configuration and auto-import into the Administration Console starts. This might take
10 to 15 minutes, depending on the configuration and hardware.
Ignore the warning about
10 Proceed with Section 3.5, "Verifying the Linux Access Gateway Installation on RHEL," on
page 34.
failed services in runlevel3
Additional Information on Installing And Configuring
for .
novell-jcc
33