Novell ACCESS MANAGER 3.1 SP1 Installation Manual page 24

15 Create a root partition as follows:
15a Select Create, select Logical partition, then select OK.
15b Fill in the following fields:
Format: Make sure Format is selected.
File system: Select Ext3 for the type.
Size: Specify
Mount Point: Select / as the mount point.
15c Select OK.
16 Create a var partition as follows:
16a Select the hard drive, select Create > Logical partition, then select OK.
24 Linux Access Gateway on Red Hat* Installation Guide
for the End cylinder value.
+30GB