Page 1
L6FBS943G User Manual Washing Machine USER MANUAL...
Page 2
16. TECHNICAL DATA....................35 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Page 4
If a tumble dryer is stacked on the top of the washing • machine, make sure to use the correct stacking kit approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation •...
Page 5
ENGLISH • Adjust the feet to have the necessary service centre for the replacement of space between the appliance and the the inlet hose. flooring. • You can extend the drain hose to • Do not install the appliance where the maximum 400 cm.
Page 6
3. INSTALLATION 4. Open the door and remove the WARNING! polystyrene piece from the door seal Refer to Safety chapters. and all the items from the drum. 3.1 Unpacking WARNING! Remove all the packaging and the transit bolts before installing the appliance.
Page 7
ENGLISH Attach the sound barriers at a room temperature. 13. Pull up the appliance in vertical position. CAUTION! Do not use alcohol, solvents or chemical products. 9. Make sure to identify the different 14. Remove the power supply cable and sizes and the positions of the sound the drain hose from the hose holders.
Page 8
A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. When the machine is installed on a plinth or if a washer dryer is stacked on the washing machine, use...
Page 9
ENGLISH 4. Connect the water inlet hose to the You can extend the drain cold water tap with 3/4" thread. hose to maximum 400 cm. Contact the authorized service centre for the other drain hose and the extension. It is possible to connect the drain hose in different ways: 1.
Page 10
4. ACCESSORIES 4.1 Available in 4.2 Stacking kit www.aeg.com/shop or from authorised dealer Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated.
Page 11
Read carefully the instructions supplied top of the washing machine only by with the appliance and with the using the correct stacking kit accessory. manufactured and approved by AEG. WARNING! Verify the compatible Do not put the tumble dryer stacking kit by checking the under the washing machine.
Page 12
Control panel Inlet hose connection Door handle Mains cable Rating plate Transit bolts Drain pump filter Hose support Feet for levelling the appliance Drain hose 6. CONTROL PANEL 6.1 Control panel description Cottons 11 10 Programme dial Stain/Prewash touch button Display •...
Page 13
ENGLISH 6.2 Display Maximum load indicator. The indicator flashes during the laundry load estimation. Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). •...
Page 14
Rinse hold indicator. Extra silent indicator. Time saving indicator. 6.3 Multilingual badges Adhesive badges in different languages are supplied with the appliance. The desired badge can be glued next to the programme dial. 7. KNOB AND BUTTONS 7.1 On/Off 7.3 Temperature...
Page 15
ENGLISH turns regularly to reduce creasing. • Prewash You must drain the water to unlock Use this option to add a pre-wash the door. phase at 30 °C before the washing If you touch the Start/Pause button, phase. the appliance performs the spinning This option is recommended for phase and drains the water.
Page 16
If you select the Cotton This option increases slightly programme at 40°C or 60°C the programme duration. and no other options are set, the display shows the 7.10 Delay Start indicator ; these are With this option you can delay the start...
Page 17
ENGLISH Programme Programme description White cotton and coloured cotton. Normal, heavy and light soil. Cottons Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, the programme Cottons at 60 °C and the programme Cottons at 40 °C with the option are respectively the «Standard 60°C cotton pro- gramme»...
Page 18
Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Synthetic sport items. This programme is designed to gently wash modern outdoor sporting garments and is also suitable for sporting clothes such as gym, cycling or jogging and simi- lar.
Page 19
ENGLISH Programme Default tempera- Maximum spin speed Maximum load ture Spin speed range Temperature range 40 °C 1200 rpm 4 kg 60 °C - Cold 1200 rpm - 400 rpm Synthetics 40 °C 1200 rpm 4 kg 40 °C - Cold 1200 rpm - 400 rpm Delicates 40 °C...
Page 21
ENGLISH 9. SETTINGS 9.1 Child Lock To deactivate/activate the acoustic signals, touch the and the With this option you can prevent children buttons simultaneously for about 6 from playing with the control panel. seconds. • To activate/deactivate this option, If you deactivate the touch the and the buttons...
Page 22
Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing results. After a washing cycle, if...
Page 23
ENGLISH 4. To use liquid detergent, turn the flap The indicator of the Start/Pause button down. flashes. The display shows the maximum declared load for the programme, the default temperature, the maximum spin speed, the washing phase indicators (when available) and an indicative programme duration.
Page 24
Changing the delay start after 11.9 Programme phase the countdown has started indicators To change the delay start: When the programme starts the indicator of the running phase flashes and the 1. Touch the Start/Pause button to other phase indicators are steady on.
Page 25
ENGLISH 11.12 Opening the door - 3. Make sure that the drum is empty. 4. Keep the door and the detergent Adding garments dispenser slightly ajar to prevent mildew and odours. 5. Close the water tap. While a programme or the delay start operates, the appliance door is locked.
Page 26
• You do not use the appliance for 5 Turn the programme dial to set a new minutes before you touch the Start/ cycle. Pause button. If you set a programme or an Press the button On/Off to activate option that ends with water the appliance again.
Page 27
ENGLISH other treatments without exceeding of your domestic system. Refer to "Water hardness". the indicated maximum level ( • Use the recommended detergents for 12.5 Water hardness the type and colour of the fabric, the programme temperature and the If the water hardness in your area is high level of soil.
Page 28
Regularly examine the seal and remove all objects from the inner part. 13.5 Cleaning the drum Regularly examine the drum to prevent rust particles. For a complete cleaning: 1. Clean the drum with special products for stainless steel. Always follow the 3.
Page 29
ENGLISH Clean the drain pump if: without removing. Let the water flow • The appliance does not drain the out. water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump.
Page 30
10. Clean the filter under the water tap. 2. Remove the inlet hose from the 11. Put the filter back into the special appliance by loosening the ring nut. guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages.
Page 31
ENGLISH values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose.
Page 32
The programme was not finished the water tap. Contact the Authorised properly or the appliance stopped Service Centre. too early. If the alarm code appears WARNING! again, contact the Authorised Service Deactivate the appliance Centre. before carrying out any •...
Page 33
ENGLISH Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not water leakages. There is water on the • Make sure that the water inlet hose and the drain hose have floor.
Page 34
15. CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant stand- ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing pro- gramme duration.
Page 35
ENGLISH 16. TECHNICAL DATA Dimension Width/ Height/ Depth/ 600 mm/ 850 mm/ 630 mm/ 660 mm Total depth Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex- cept where the low voltage equipment has no pro-...
Need help?
Do you have a question about the L6FBS943G and is the answer not in the manual?
Questions and answers