Dell SCv3020 Getting Started Manual

Dell SCv3020 Getting Started Manual

Hide thumbs Also See for SCv3020:
Dell SCv3000 and SCv3020 Storage System
Getting Started Guide
Regulatory Model: E03T
Regulatory Type: E03T001
Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCv3020 and is the answer not in the manual?

Summary of Contents for Dell SCv3020

  • Page 1 Dell SCv3000 and SCv3020 Storage System Getting Started Guide Regulatory Model: E03T Regulatory Type: E03T001...
  • Page 2: Notes, Cautions, And Warnings

    WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
  • Page 3: Setting Up The Storage System

    The service tag and Express Service Code are found on the front of the system by pulling out the information tag. Alternatively, the information might be on a sticker on the back of the storage system chassis. This information is used by Dell to route support calls to the appropriate personnel.
  • Page 4: Other Information You May Need

    The Dell SCv3000/SCv3020 Storage System Deployment Guide provides information about cabling storage system hardware components and configuring a new storage system using the Dell Storage Manager Client. • The Dell Storage Manager Administrator’s Guide describes how to use Dell Storage Manager to manage Storage Center systems. Installation and Configuration Before you begin installation, make sure that the site where you plan to install the storage system has standard power from an independent source or a rack power distribution unit with a UPS.
  • Page 5 Follow the detailed installation instructions located in the rail kit box for your particular style of rails. NOTE: Dell recommends using two people to install the rails, one at the front of the rack and one at the back. Steps Position the left and right rail end pieces labeled FRONT facing inward.
  • Page 6: Install The Front Bezel

    Figure 4. Tighten the Screws If the Storage Center system includes expansion enclosures, mount the expansion enclosures in the rack. See the instructions included with the expansion enclosure for detailed steps. Install the Front Bezel Install the bezel on the front of the storage system. Hook the right end of the bezel onto the storage system.
  • Page 7: Connect The Power Cables

    The following information is provided on the device described in this document in compliance with the requirements of the official Mexican standards (NOM): Importer Dell Inc. de México, S.A. de C.V Paseo de la Reforma 2620-11 ° Piso Col. Lomas Atlas 11950 México, D.F.
  • Page 8: Technical Specifications

    SCv3000 Supports a total of 150 drives and up to 120 drives on a single SAS Configurations chain. SCv3020 Supports a total of 150 drives and up to 134 drives on a single SAS chain. Redundant Array of Independent Disks (RAID)
  • Page 9 Physical Height 13.34 cm (5.25 in.) Width 44.50 cm (17.5 in.) SCv3000 81.91 cm (32.25 in.) Depth SCv3020 78.27 cm (31 in.) SCv3000 45 kg Approximate weight (maximum configuration) SCv3020 43 kg Approximate weight without drives 32.5 kg (72 lb)
  • Page 10 Environmental For additional information about environmental measurements for specific storage system configurations, see dell.com/ environmental_datasheets. Temperature Operating 10°C (50°F) to 35°C (95°F) with a maximum temperature gradation of 20°C/ hour (36°F/hour) Operating above 35°C could result in data loss Storage –40°...

This manual is also suitable for:

Scv3000E03t

Table of Contents