Advertisement
Quick Links
Advertisement
Related Manuals for AEG NIG64B30AB
Summary of Contents for AEG NIG64B30AB
- Page 1 EN User Manual | Hob NIG64B30AB aeg.com\register...
- Page 2 Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, troubleshooting, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................8 5. BEFORE FIRST USE..................10 6.
- Page 3 • Children should be supervised to ensure that they do not play with the appliance. • Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down.
- Page 4 • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use the appliance before installing it in the built-in structure. • Do not use water spray and steam to clean the appliance. •...
- Page 5 • If the appliance is installed above a Make sure that there is access to the drawer: mains plug after the installation. – Do not store any small pieces or • If the mains socket is loose, do not sheets of paper that could be pulled in, connect the mains plug.
- Page 6 2.4 Care and cleaning • Do not use aluminum foil or other materials between the cooking surface • Clean the appliance regularly to prevent and the cookware, unless otherwise the deterioration of the surface material. specified by the manufacturer of this •...
- Page 7 3.2 Built-in hobs CAUTION! Only use the built-in hobs after you assemble Do not connect the cable without cable the hob into correct built-in units and work end sleeve. surfaces that align to the standards. One-phase connection 3.3 Connection cable 1.
- Page 8 500mm 50mm Find the video tutorial "How to install your AEG Induction Hob - Worktop installation" by typing out the full name indicated in the graphic below. www.youtube.com/electrolux If the appliance is installed above a drawer, www.youtube.com/aeg...
- Page 9 4.2 Control panel layout Main view Symbol Description To activate and deactivate the hob. Window of the Hob²Hood infrared signal communicator. Do not cover it. Zone with Pan-frying and Boiling functions. Zone with Boiling function. A shortcut for Bridge. To merge two side cooking zones to create one cooking area or to split the merged zones.
- Page 10 Symbol Description Settings. To open the settings of the hob. Bridge. To connect two side cooking zones so that they operate as one. Lock. To lock / unlock the control panel. Pause. To set all cooking zones that operate to the lowest heat setting. 1 - 9 To set a heat setting.
- Page 11 5.1 Navigating the display To navigate between the screens, tap on the symbols on the bottom of the display. You can also swipe to the left to manage the settings for Hob²Hood or to the right to reach the Menu. 5.2 First connection to the mains 5.4 FlexPower When you connect the hob to the mains you...
- Page 12 6. DAILY USE 6.3 Pot detection WARNING! This feature detects if pots were placed on Refer to Safety chapters. the cooking zones and deactivates the cooking zones if the cookware is no longer 6.1 Activating and deactivating detectable. • If you put cookware on a cooking zone Touch for 1 second to activate or first and then activate the hob, a grey bar...
- Page 13 6.6 Boost You can cook with large cookware placed on two cooking zones at the same time using This function makes more power available to Bridge. the induction cooking zones. The function can be activated for the induction cooking zone only for a limited time.
- Page 14 • when the hob is deactivated but the 6. Touch OK to confirm. cooking zone is still hot. You can also choose to cancel your selection. The indicator disappears when the cooking You can change the ECO Timer settings zone has cooled down. during cooking: touch with the timer Keep Warm mode...
- Page 15 setting. You can use it to cook with large cookware. When you deactivate the hob, you also Cookware must cover the centres of both deactivate this function. zones. If the cookware is located between the two centres, the function will not be activated. 6.13 Child Lock 1.
- Page 16 • You can change the default heat level, if 6.15 FUNCTIONS: Boiling needed. • For thick pieces of food or raw potatoes This function adjusts the heat setting level use a lid during the first 10 min of frying. automatically so that water does not boil over •...
- Page 17 1. Place cookware on the cooking zone. You can use a single cooking zone or connect two side zones using Bridge. 2. Select Dishes. 3. Select the food type. 4. Set a timer function, if needed. 5. Follow the instructions on the display. max.
- Page 18 To activate the maximum fan speed level Setting the automatic fan mode touch Boost. The fan runs in Boost mode for a certain time. After that time the fan speed To set the hood to an automatic mode, level automatically changes to 3. To choose between the following set fan speeds: deactivate Boost manually, press 0.
- Page 19 There are 5 brightness levels, 1 is the lowest • If a higher heat setting is not available and 5 is the highest. reduce it for the other cooking zones first. Refer to the illustration for possible 1. Touch to open the Menu. combinations in which power can be 2.
- Page 20 7.2 Noises during operation glass or the side trim as it may chip or damage the glass surface. Cookware material • correct: cast iron, steel, enamelled steel, The noises are normal and do not stainless steel, multi-layer bottom (with a indicate any malfunction.
- Page 21 Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol Keep the window of the Hob²Hood infrared signal communicator clean.
- Page 22 the hob with a moist cloth and a non- • Remove shiny metallic discoloration: abrasive detergent. After cleaning, wipe use a solution of water with vinegar and the hob dry with a soft cloth. clean the glass surface with a cloth. 9.
- Page 23 Problem Possible cause Remedy Hob²Hood does not work. You covered the control panel. Remove the object from the control panel. Hob²Hood screen is not visible. Hob²Hood is turned off in the set‐ Go to settings/Hob²Hood and acti‐ tings. vate the function. Hob²Hood operates, but only the You activated Mode 1.
- Page 24 Make sure, you operated the hob correctly. If not the servicing by a service 10. TECHNICAL DATA 10.1 Rating plate Model NIG64B30AB PNC 949 598 035 00 Typ 62 B4A 01 AA 220 - 240 V / 400 V 2N, 50 Hz Induction 7.35 kW...
- Page 25 For optimal heat transfer and cooking results use cookware with bottom diameter similar to 11. ENERGY EFFICIENCY 11.1 Product Information according to EU Ecodesign Regulation Model identification NIG64B30AB Type of hob Built-In Hob Number of cooking zones Heating technology Induction Diameter of circular cooking zones (Ø)
- Page 26 11.3 Product Information for power consumption and maximum time to reach applicable low power mode Power consumption in off mode 0.3 W Maximum time needed for the equipment to automatically reach the applicable low 2 min power mode 12. ENVIRONMENTAL CONCERNS appliances marked with the symbol with Recycle materials with the symbol...
- Page 28 867379032-B-502024...
Need help?
Do you have a question about the NIG64B30AB and is the answer not in the manual?
Questions and answers