Sony MHC-V83D, MHC-V73D Manual

Listening to TV sound via the system

Note on lighting
The lighting will turn on when you turn on the system. Do not look directly at the light-emitting parts.
To turn off the lighting, press PARTY LIGHT repeatedly to select "LED OFF".
Select one of the connections below according to the jacks/connector on your TV.

TV with HDMI IN (ARC) connector

TV without HDMI IN (ARC) connector

* Before connecting the audio cable, be sure to press – (or touch VOLUME – on the unit) repeatedly until the "VOL MIN" appears on the display.

Note
To listen to TV sound, do the following:

• Press FUNCTION repeatedly to select "TV".
• Set the speakers setting of the TV (BRAVIA) to Audio System. Refer to the operating instructions of your TV on how to set the TV.

If "CODE 01" and "SGNL ERR" appear on the display of the unit
When the audio input signals to the system are other than 2-channel Linear PCM signals, the messages "CODE 01" and "SGNL ERR" (indicate that the input audio signals are unsupported) appear on the display of the unit.
In this case, select the proper audio output mode on the TV in order to output 2-channel Linear PCM audio signals. For details, refer to the operating instructions of your TV.