Advertisement
Quick Links
User guide
Gaming Monitor
S27DG60*S
S37FG75*
S27DG61*S
S40FG75*
S27FG60*S
The colour and the appearance may differ depending on the product, and the content in the manual is
subject to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where
the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the
user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
S27FG81*S
S27FG90*X
S32FG81*S
Advertisement
Related Manuals for Samsung S37FG75 Series
Summary of Contents for Samsung S37FG75 Series
- Page 1 The contents of this manual are subject to change without notice to improve quality. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than that of Samsung are owned by their respective owners.
- Page 2 Table of contents Before Using the Product Connecting and Using a Source Device Menu Safety Precautions Read below before connecting the product. Game Electricity and Safety Ports Picture Installation Operation Connecting and Using a PC PIP(PIP/PBP) Connection Using the HDMI Cable Cleaning OnScreen Display Connection Using an DP Cable...
- Page 3 Table of contents Troubleshooting Guide Appendix Requirements Before Contacting Samsung Responsibility for the Pay Service (Cost to Customer Service Centre Customers) Product diagnosis (Screen issue) Not a product defect Checking the Resolution and Frequency A Product damage caused by customer's fault Check the following.
- Page 4 Do not disconnect the power cord while the product is being used. product. • Only use the power cord provided with your product by Samsung. Do not use the power cord with This symbol indicates that this other products. product has included important DC voltage: Rated voltage marked •...
- Page 5 Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or ‒ Be sure to consult Samsung Customer Service Centre if you want to install the product at such a smoke.
- Page 6 ‒ Be sure to power off the product and disconnect the power cord when water or other foreign Warning substances have entered the product. Then contact Samsung Customer Service Centre. • There is a high voltage inside the product. Never disassemble, repair or modify the product •...
- Page 7 Caution • Do not hold the product upside-down or move it by holding the stand. ‒ The product may fall and become damaged or cause an injury. • Leaving the screen fixed on a stationary image for an extended period of time may cause •...
- Page 8 High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be charged.) Do not press the monitor screen.
- Page 9 Preparations Installation Check the direction of the arrow on the stand base. Align the direction of the arrow on the stand base with the front direction of the stand neck, and then insert the stand neck from top to bottom. Turn the stand neck clockwise to fasten it to the base.
- Page 10 S27DG60*S / S27DG61*S S27FG90*X S27FG60*S / S27FG81*S S32FG81*S S37FG75* / S40FG75* Stand up the monitor as shown in the figure. Stand up the monitor as shown in the figure. Put the stand base onto the Tightly fasten the connecting stand neck as the direction screw at the bottom of the shown in the figure.
- Page 11 Precautions for moving the product S27FG90*X ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S27DG60*S / S27DG61*S / S27FG60*S / S37FG75* / S40FG75* / S27FG81*S / S32FG81*S •...
- Page 12 Checking the space around the product S27FG90*X Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product.
- Page 13 Adjusting the Product Tilt and Height S37FG75* / S40FG75* -20.0° (±3.0°) ~ 20.0° (±3.0°) ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S27DG60*S / S27DG61*S / S27FG60*S / S27FG81*S / S32FG81*S -2.0°...
- Page 14 Caution S27FG90*X ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S27DG60*S / S27DG61*S / S27FG60*S / S37FG75* / S40FG75* / S27FG81*S / S32FG81*S • Grasp the centre of the monitor and adjust the height. •...
- Page 15 Rotating the Product You can rotate your product as shown below. S27DG60*S / S27DG61*S / S27FG60*S / S27FG81*S / S32FG81*S ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S27DG60*S / S27DG61*S / S27FG60*S / S27FG81*S / S32FG81*S -30.0°...
- Page 16 If you Wall mount bracket install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount Product kits contain a detailed installation manual and all parts necessary for assembly are provided.
- Page 17 Control Panel Parts Description Use this multi-directional button to turn on the power or navigate ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without menus. notice to improve quality. This LED is power status indicator. ―...
- Page 18 ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without Parts Description notice to improve quality. 5-Way Button Multi directional button that helps navigate. S37FG75* / S40FG75* Function Key Guide This LED is power status indicator. ―...
- Page 19 Connecting and Using a Source Device Read below before connecting the product. Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. Before connecting the product, make sure you remove the power cords from both the product and the external device to prevent damage to the product due to a short circuit or over current.
- Page 20 Ports Port Description Connects to a PC using a USB cable. ― The functions available may vary depending on the product model. The colour and shape of parts may ― This port can only connect to a PC. differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to Connect to a USB device.
- Page 21 Connecting and Using a PC S27FG90*X Select a connection method suitable for your PC. Connection Using the HDMI Cable Port Description ― It is recommended to use the HDMI cable provided as components. If not provided, be sure to use authorised cable for HDMI cable connections.
- Page 22 Connection Using an DP Cable Connecting the Product to a PC as a USB HUB Using the product as a hub, connect and use various source devices with the product at a time. ― Port names and the number of ports may differ, depending on the model. ―...
- Page 23 Connecting the Power S37FG75* / S40FG75* S27DG60*S / S27DG61*S / S27FG60*S / S27FG81*S / S32FG81*S HDMI IN DP IN Connect the power cord to the AC/DC adapter. Then, connect the AC/DC adapter to the DC **V port on the back of the product. ‒...
- Page 24 • Convert 2D videos into 3D videos. Read before using the 3D monitor ‒ For details on your 3D monitor, please visit the Samsung website at http://www.samsung.com, and refer to the User guide. • Users can only view games that are compatible with Samsung Odyssey 3D Hub.
- Page 25 Available 3D effects may differ, depending on the game content and the computer specifications. ‒ Odyssey 3D Hub software can be downloaded from the Samsung website. Alternatively, install it by searching for “Samsung Odyssey 3D Hub” in the Microsoft Store. •...
- Page 26 Launching Odyssey 3D Hub Converting 2D to 3D ― This is supported on NVIDIA graphics cards only. Click the Odyssey 3D Hub icon on the desktop. When Odyssey 3D Hub is running, run an app that supports full screen mode from the computer’s At the top of the screen, a red light illuminates when the camera turns on.
- Page 27 Recommended computer specifications Minimum PC specifications for installing Odyssey 3D Hub software Hardware • Windows 10, 64-bit, version 22H2 • At least 4GB of free HDD space required (current installed capacity: 2.9GB) • Windows 11, 64-bit • DDR memory with capacity of at least 2GB (PC motherboard) Recommended specs for 3D operation by function Recommended Intel Notebook...
- Page 28 Tidying Up the Cables S27FG90*X S27DG60*S / S27DG61*S / S27FG60*S / S37FG75* / S40FG75* / S27FG81*S / S32FG81*S Pass cables through the hole on the stand. Connect the cables to the corresponding ports. Connect the corresponding cables. Pull the right side of the HOLDER-STAND CABLE to remove from the stand.
- Page 29 Setting Optimum Resolution Using the Panel Care feature An information message about setting optimum resolution will appear if you power on the product for Protects the panel to prevent problems with the product screen. ― If your OLED Product displays the same still image for 10 minutes, the first time after purchase.
- Page 30 Menu Function Key Guide → ― The functions available may vary depending on the product model. The colour and shape of parts may Description differ from what is shown. Specifications are subject to change without notice to improve quality. Adaptive-Sync Adaptive-Sync technology is solution that eliminates screen tearing without all the usual lag and latency.
- Page 31 Description Description Ultrawide Game View Set the game screen’s ratio to wide for more immersive gaming. Virtual Aim Point • Off: Virtual Aim Point is not available while is selected. ― This menu is not available when PIP Mode PIP/PBP Mode) is •...
- Page 32 Picture Description Screen Size Select the best screen size and ratio. ― This option is not available when Ultrawide Game View is set to On. Description (S27DG60*S / S27DG61*S / S37FG75* / S40FG75* / S27FG81*S / S32FG81*S / S27FG90*X models only.) Picture Mode This menu provides an optimum picture quality suitable for the ―...
- Page 33 Description Description Picture Mode mode Picture Mode • RTS: Increase the colour temperature and contrast ratio to improve visibility of the RTS (Real-Time Strategy) screen and When the external input is connected through HDMI/DP and minimap. AV Mode is set to AV, Picture Mode has eleven picture settings (Dynamic, Standard, Eco, Movie,...
- Page 34 Description Description Sharpness Make the outline of objects more clear or blurry. (Range: 0~20) Local Dimming Control the brightness of individual areas on the screen to maximize contrast automatically. A higher value will make the outline of objects clearer. ― This menu is not available when ―...
- Page 35 Description Description White Balance Adjust the colour temperature of the picture so that white objects Shadow Detail Adjust the brightness of dark images. Black detail increases as the appear brighter. value nears 5. ― This menu is not available when ―...
- Page 36 Description Description Dynamic Brightness Automatically adjust the Brightness to provide the best possible Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation. screen contrast under the current conditions. When Eye Saver Mode is 'On', the blue light that wavelength is ―...
- Page 37 PIP(PIP/PBP) OnScreen Display ― S27FG60*S models are not supported. Description Description Language Set the menu language. ― A change to the language setting will only be applied to the onscreen PIP Mode PIP/PBP Mode) Turn PIP Mode PIP/PBP Mode) on or off. ―...
- Page 38 Description Description Off Timer Plus Off Timer PC/AV Mode PC/AV Mode to AV. The picture size will be enlarged. • Timer: Turn on Off Timer mode. This option is useful when you view a movie. ― Products with a display area of 16:9 or 16:10 are only supported. •...
- Page 39 Description Description Input Port Ver. Select an HDMI version. (1.4 / 2.0↑) Key Repeat Time Control the response rate of a button when the button is pressed. ― The supportable device and resolution may differ depending on its Acceleration, sec, or 2 sec can be selected.
- Page 40 Save the update file (in .bin or .img format) that you downloaded is not a monitor problem. Since S/W update is performed normally, from the Samsung website (http://www.samsung.com) to a USB please wait until the update is finished. storage device.
- Page 41 Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website. (http://www.samsung.com) ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
- Page 42 Check the following. Customer Service Centre Caution ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. When the product makes popping (cracking) sound. The sound may be caused by contraction or expansion from temperature change of external Product diagnosis (Screen issue) components or internal circuit of the product.
- Page 43 Screen issue The screen is too bright. The screen is too dark. Adjust Brightness and Contrast. The power LED is off. The screen will not turn on. Screen colour is inconsistent. Check that the power cord is connected properly. Change the Color settings.
- Page 44 Sound issue Issues related to the stereo camera There is no sound. The LED indicator camera at the top of the monitor does not work when using 3D. Re-check the condition of the connected headphone or earphone or adjust the volume. Reset the camera if it does not work.
- Page 45 Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. ― The path to the settings depends on the installed OS. ― This function may not be supported depending on the model. How can I change the frequency? Set the frequency on your graphics card.
- Page 46 Specifications General Model Name S27DG60*S / S27DG61*S / S27FG60*S S37FG75* S40FG75* Size 27 Class (26.7 Inches / 67.8 cm) 37 Class (36.5 Inches / 92.7 cm) 40 Class (39.6 Inches / 100.6 cm) Display area 590.42 mm (H) x 333.72 mm (V) 808.0128 mm (H) x 454.5072 mm (V) 926.8224 mm (H) x 391.0032 mm (V) Pixel Pitch...
- Page 47 Model Name S27FG81*S S32FG81*S S27FG90*X Size 27 Class (26.6 Inches / 67.7 cm) 32 Class (31.6 Inches / 80.3 cm) 27 Class (26.9 Inches / 68.4 cm) Display area 589.97 mm (H) x 332.9 mm (V) 699.48 mm (H) x 394.73 mm (V) 596.736 mm (H) x 335.664 mm (V) Pixel Pitch 0.153 mm (H) x 0.153 mm (V)
- Page 48 The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. ― This license may not be supported depending on the model or geographical area. Please refer to the samsung.com website for detailed information regarding FreeSync.
- Page 49 Standard Signal Mode Table S27FG81*S / S27FG90*X / Model Name S27DG60*S S27DG61*S S27FG60*S S40FG75* S32FG81*S S37FG75* Synchronization (PANEL Spec) Vertical Frequency 48 ~ 360 Hz 48 ~ 240 Hz 48 ~ 500 Hz 48 ~ 240 Hz 48 ~ 165 Hz 48 ~ 180 Hz Resolution Optimum resolution...
- Page 50 Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) HDMI IN DP IN VESA, 1152 x 864 67.500 75.000 108.000 VESA, 1280 x 720 45.000 60.000 74.250 VESA, 1280 x 800 49.702 59.810 83.500 VESA, 1280 x 1024 63.981 60.020 108.000...
- Page 51 Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) HDMI IN DP IN Custom Timing, 2560 x 1440 96.479 59.999 277.860 Custom Timing, 2560 x 1440 192.958 119.999 555.720 3) 4) Custom Timing, 2560 x 1440 257.169 164.958 699.500...
- Page 52 Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) HDMI IN DP IN Custom Timing, 1920 x 1080 96.479 59.999 277.860 Custom Timing, 1920 x 1080 289.352 239.927 625.000 3) 4) Custom Timing, 1920 x 1080 192.788 164.917 401.000...
- Page 53 • Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...
- Page 54 ― If you encounter any issues when using the function, contact the Samsung Service Centre. FreeSync (for AMD graphics card) ― If you change the screen resolution while the function is On, the screen may intermittently blank out due to the graphic card. Set...
- Page 55 • The sound quality of the product may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Centre. ― When the resolution is changed while setting Adaptive-Sync, the screen tearing can happen intermittently.
Need help?
Do you have a question about the S37FG75 Series and is the answer not in the manual?
Questions and answers