Table of Contents
Advertisement
User Manual
S27C39* S32C39*
The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the
user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
Advertisement
Table of Contents
Need help?
Do you have a question about the S32C39 Series and is the answer not in the manual?
Questions and answers
LOOKS LIKE 2 SETS OF POWER AND COMPUTER INPUT ON THE MONITOR.WHICH ONE DO I CHOOSE
The Samsung S32C39 Series monitor should use an AC 100-240V~ 50/60Hz power supply. For computer input, it supports HDMI and DisplayPort connections, which should be set to the appropriate version in the system settings (HDMI: 1.4 or 2.0, DisplayPort: 1.1 or 1.2).
This answer is automatically generated
QUESTION WAS REFERRENCUNG PHYSICALLY MOVING / TILTING THE DEV
To physically move the Samsung S32C39 Series monitor:
- Hold the lower corners or edges of the product when moving it.
- Do not apply direct pressure on the screen.
- Do not hold the screen or the product upside down by the stand.
- Do not press down on the product to avoid damage.
To tilt the monitor:
- The monitor tilt can be adjusted.
- Hold the lower part of the product and adjust the tilt carefully.
- The monitor angle can be adjusted from -1° to +1°.
This answer is automatically generated
INSTALLED SCREEN - HOW DO I GET VERTICAL TILTING
To adjust the vertical tilting on the Samsung S32C39 Series screen, follow these steps:
1. Hold the bezel at both side edges of the monitor (avoid directly holding the LCD display).
2. Carefully adjust the monitor angle until the screen becomes level.
3. The monitor angle can be adjusted from -1° to +1°.
4. The product tilt can also be adjusted by holding the lower part of the product and tilting it as needed.
Be careful not to apply direct pressure on the screen to avoid damage.
This answer is automatically generated
bank screen after hook up
If the Samsung S32C39 Series monitor shows a blank screen after connecting it, follow these steps:
1. Check the Resolution: Ensure the selected resolution is supported by the monitor (refer to the Standard Signal Mode Table). If an unsupported resolution is selected, the "Not Optimum Mode" message may appear, or the screen may not display properly.
2. Adjust Screen Size: If there are blank spaces on the screen, adjust the screen size settings in the HDMI or DVI settings of the graphics card.
3. Update Graphics Driver: If the graphics card settings do not have an option to adjust the screen size, update the graphics card driver to the latest version.
4. Contact Manufacturer: If issues persist, contact the graphics card or PC manufacturer for further support on adjusting screen settings.
This answer is automatically generated