XINLEI TS102 Manual

Universal tv stand base

Download this manual

Warning! If improperly assembled, may result in serious injury, death or

property destruction. Please read the instructions and warning informa-

tion carefully before assembling.

If you do not understand the instructions or encounter any problems,

please contact the qualiﬁed local installation personnel.

Do not assemble products if they are damaged or missing accessories. If

you need replacement parts or anything else, please contact us.

Do not use these products for anything other than the purpose for which

they were designed.

This product design includes sliding parts, please use caution for safety.

Pay Attention

TS��

Need help?

Do you have a question about the TS102 and is the answer not in the manual?

Page 1 TS�� Pay Attention Warning! If improperly assembled, may result in serious injury, death or property destruction. Please read the instructions and warning informa- tion carefully before assembling. If you do not understand the instructions or encounter any problems, please contact the qualiﬁed local installation personnel. Do not assemble products if they are damaged or missing accessories.
Page 2 Screw Bag � (�)Rubber Feet-A (�)M�*�� Bolt-B (�)M�*�� Bolt-C (�)M�*�� Bolt-E (�)M�*�� Bolt-F (�)M�*�� Bolt-D (�)φ�*φ��*�� Spacer-G (�)φ�*φ��*� Spacer-H (�)φ�*φ��*� Washer-I (�)φ�*φ��*� Washer-J (�)M�*�� Bolt-K Screw Bag � (�)Elliptic Lock-e (�)Elliptic Pad-f (�)S� Allen Key-i (�)Plastic Wiring-g Parts (�)Panel -L (�)Head Support-M (�) Glass Base -N (�) Pillar-O...
Page 3 Step �: Install the base and pillar...
Page 4 Step �: Install the head support...
Page 5 Step �: Install the panel and extended pieces Before installation Check the VESA speciﬁcation on the back of the TV...
Page 6 Step �: Install the panel and TV...
Page 7 Step �: Install the TV and head support Need to hold up the TV Finished Remove the pre-installed bolts Put the TV into the head support and push it in as shown Then re-install the removed bolts...
Page 8 Step �: Wire layout...