Download Print this page

Advertisement

Quick Links

MA1330
INSTALLATION MANUAL
UNPACKING INSTRUCTIONS
Carefully open the carton, remove contents and lay out on
cardboard or other protective surface to avoid damage.
Check package contents against the Supplied Parts List in the next
page to assure that all components were received undamaged. Do
not use damaged or defective parts.
Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction
before beginning the installation, and carefully follow all instructions
contained herein. Use proper safely equipment during installation.
Please call a qualified installation contractor for help if you:
If you don't understand these directions or have any doubts about
the safely of the installation.
If you are uncertain about the nature of your wall, consult a qualified
installation contractor.
Do not use this product for any purpose or in any configuration not
explicitly specified in this instruction. We hereby disclaims any and
all liability for injury or damage arising from incorrect assembly,
incorrect mounting, or incorrect use of this product.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MA1330 and is the answer not in the manual?

Questions and answers

Summary of Contents for XINLEI MA1330

  • Page 1 MA1330 INSTALLATION MANUAL UNPACKING INSTRUCTIONS Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage. Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts.
  • Page 2 Supplied Parts List a -Wall Plate & b-VESA Plate(1) c-Wrench(1) Articulating Arms ( 1) d-Bolt(2) e- Spacer(4) f- M4 ×12Bolt ( 4) g-M4×30Bolt ( 4) h-Bolt Cover(2) i-Lag Bolt Washer(2) j-Lag Bolt(2) k-Concrete Anchor(2) l-Cable Tie(3) m-Allen Key(1)
  • Page 3 CAUTION! This TV mount must be securely attached to the  vertical wall. If the mount is not properly installed it  WARNING may fall, resulting in possible injury and/or damage. Tools Required 4mm Drill Bit 10mm Masonry Bit Phillips Screwdriver Carpenter’s Level Step 1 Install the Wall Plate to the Wall Brick Mount  ...
  • Page 4 Wood Mount...
  • Page 5 Attach VESA Plate to the Mounting Hole of TV Step 2 This way up! For Flat Back TV This way up! For Curved Back TV...
  • Page 6 Attach VESA Plate to the Socket on the Articulating Arm Step 3...
  • Page 7 Adjust the Tilting Angle and Attach the Bolt Cover Step 4...