XINLEI PR14 Installation Instructions

Read through ALL instructions before commencing
assembly.
If you have any questions about this product or issues
with assembly contact the customer services help
line before returning this product to the store.
Retain all packaging in case the bracket needs to be
returned.
Contents may vary from photography illustrations.
You will not need all these parts, so expect there to be some
left over depending upon the specification of your projector
.
This product is intended for indoor use only. Use of this
product
outdoors could lead to failure and personal injury. It is the
responsibility of the installer to ensure that the mounting
surface is of a suitable standard and void of any services (eg
gas, electricity, water etc).
Tool recommend (not included)
Stud Finder
10mm(25/64")
Masonry
INSTALLATION INSTRUCTION
4.5mm(1/8")
Wood
Screws for projector
D
C
4
E F G
Boxed Parts
A1 B1
×1 ×1
PR14
C1
×4
H
K
J