Advertisement
Quick Links
WARNING!
Severe personal injury and property damage can result from improper
installation or assembly. Read the following warning carefully before beginning.
· If you do not understand the instructions or have any concerns or questions,
please contact a qualified local installer.
· Do not install or assemble if the product or hardware is damaged or missing.
If you require replacement parts, please contact your local distributor for
assistance.
· This product fits most ��"-��" LCD/plasma screen; load capacity up to ��
lbs/��kg.
· Do not use this product for anything other than the original purpose.
· This product contains moving parts, please use with caution.
INSTALLATION INSTRUCTION
��"-��"
MAX:���X���MM
��lbs
(��KG)
ML��A
VESA
Pattern
Advertisement
Related Manuals for XINLEI ML55A
Summary of Contents for XINLEI ML55A
- Page 1 INSTALLATION INSTRUCTION ML��A WARNING! Severe personal injury and property damage can result from improper installation or assembly. Read the following warning carefully before beginning. · If you do not understand the instructions or have any concerns or questions, please contact a qualified local installer. ·...
- Page 2 Parts Plastic fixing Long square Short square Panel x� Caster x� cover x� tube x� tube x� Column x� Hook x� Spring fastener x� Welded base x� Tray locking bracket x� Head locking bracket x� Screw package B: M�*�� Inner-hexagon x� A: S�/S�/S�...
- Page 3 Installation of base Step � � to � ② �.� ① � to � Insert the long square tubes and short square tubes into the welded base according to the � to �, � to � markings. Tighten screw I with wrench A �.�...
- Page 4 Installation of plastic fixing cover and Step � column and base �.�.� Loosen the screw �.�.� Tighten the on the column with � columns wrench A �.� �.�.� Re-insert the �.�.� The installation screw with wrench A is complete �.� �.�.�...
- Page 5 Installation of column and Tray Locking Step � Bracket and head locking bracket Head locking bracket must �.� be in the same side as long tubes or it may tip over. �.� Use wrench A to loosen the screws on the tray locking bracket �.�...
- Page 6 Step � Installation of panel and stand Remove the pre-positioned screws Hang the panel into the column Then tighten the screws Complete the installation as shown...
- Page 7 TV and hooks installation Step � Preparation: ���MM Check VESA patterns on the back of TV Please use proper screws; leave room between TV and screw ! (please use higher spacer for long screws in case of TV damage). Hook...
- Page 8 Installation of TV and stand Step � Need someone to lift the TV �.�Hang the hooks into the panel, Available in three heights �.�Insert the spring fasteners into the corresponding �.� Complete the spring buckle positions installation of the �.� �.�...
Need help?
Do you have a question about the ML55A and is the answer not in the manual?
Questions and answers