Getting Acquainted; Display, Switches, And Connections; Features - Fluke 620 User Manual

Never operate portable transmitting
devices during a cable test. Doing so
might cause erroneous test results.

Getting Acquainted

Display, Switches, and Connections

SETUP
5
Figure 1. Cable Meter System
1
620 LAN CABLEMETER
2
ENTER
3
4
abm01f.eps
Table 2. Features
ITEM
LCD
A 2-line by 16-character LCD display. When there is
more information than can be displayed on two lines,
and up arrow, down arrow, or bidirectional arrow
appears in the left side of the display. Press the
corresponding C or D key to display the
additional information.
E
Enters a selection into the test tool and moves to the
next setup selection. Causes current cable selection to
be displayed and a new measurement cycle initiated
when not in Setup Mode.
B
Turns the display backlight on or off. Backlighting turns
off automatically after 70 seconds.
D C
Scrolls through a selection of choices or multiple
displays
Provides access to cable selection, calibration, and
other test tool settings.
CableMeter
Getting Acquainted
FUNCTION
3