Alpine TIZ194BZ Assembling & Using Your Product

Unpack all components carefully. Please check to ensure all parts
have been removed from the packaging. Some splashing may occur.
Components:

Assembling:

Connect the vinyl tubing to the water pump from inside the
fountain top. Adjust the flow control to the lowest setting to
avoid splashing until the fountain is completely assembled.

Feed the LED light strand through the center of the fountain
base. Connect the LED light strand to the transformer.

Place the fountain top on to the fountain basin.

Gently pour water into the fountain, being careful not to
overflow and cause splashing. Make sure the water completely
submerges the pump and the water runs clear during operation.
Plug the transformer and pump cord into your local power
supply. Make sure that there is no water around the transformer
and always keep the power source in a dry place.
o
Assembling & Using Your Product
NOTE: We recommend that you use distilled water to
prevent scale build-up. The first time you operate the
pump it can take up to 5 minutes for the air to be
completely expelled and water begins to flow properly.