Download Print this page

Troubleshooting Guide - Haier IPD-157W User Manual

Ipod, iphone, ipad docking station speaker system
Hide thumbs

Advertisement

Table of Contents
ENGLISH
Symptom
IPod,iPhone, iPad Player(Example "iPod")
Unit does not respond
(no power)
iPod does not dock
properly
iPod does not
respond to the unit
iPod did not
charge up
Remarks:
If trouble shooting does not eliminate the problem, disconnect the DC IN plug from the back of
unit and reconnect after a few seconds. This resets the unit to it's factory default settings and
results in the deletion of all previous settings.
21

TROUBLESHOOTING GUIDE

Possible Cause
AC adaptor is not plugged into a
wall outlet or the connector is
not plugged into the DC IN jack
on the back of the unit.
Using no or wrong iPod insert
iPod did not install properly
iPod is not installed properly
iPod is locked up
Using first or second generation
iPod, iPod shuffle or other
devices.
iPod is not installed properly
iPod is locked up/frozen
iPod battery has problem
Soluti on
Plug the AC adaptor into a wall
outlet and plug the connector
into the DC IN jack on the unit.
Make sure the dock insert is
the proper fit for the iPod.
Remove the iPod from the dock
and check for obstruction on
the connections in the dock and
on the iPod. Then reseat it in
the dock.
Remove the iPod from the dock
and check for obstruction on
the connections in the dock and
on the iPod. Then reseat it in
the dock.
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.
This unit cannot control those
iPod or other devices.
Remove the iPod from the dock
and check for obstruction on
the connections in the dock and
on the iPod. Then reseat it in
the dock.
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.

Advertisement

Table of Contents
loading

  Also See for Haier IPD-157W

  Related Manuals for Haier IPD-157W

This manual is also suitable for:

Ipd-157bIpd-157