Table of contents Safety ...3 Intended use ...3 Labels in this manual ...3 General safety instructions ...3 FCC Information ...4 FCC Part 15 ...4 Preparations for use ...5 Unpacking ...5 Package contents ...5 Installation ...5 Connecting random equipment ...6 Connecting to the mains ...7 Remote control ...7 Functions ...8 iPod Music System ...8...
Safety Intended use This iPod Music System functions as a docking station to play music from an iPod/iPhone. Read the manual carefully before first use. Label in this manual WARNING A warning means that injury or death is possible if the instructions are not obeyed. CAUTION A caution means that damage to the equipment is possible.
FCC INFORMATION FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Preparations for use Unpacking • Unpack the appliance carefully. • Check the package contents as described below. If any item is missing, please contact your reseller. • Remove the labels from the front panel carefully if present. It is recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service.
CAUTION • Do not place the unit near a heat source. • Do not expose the unit to direct sunlight. This unit is equipped with rubber feet to prevent it from moving. The feet are made from non-migrating material specially formulated to avoid leaving any marks or stains on furniture.
Connecting to the outlet • Connect the adaptor plug on the adaptor cable to the DC 8.5V input connection. • Connect the adaptor to a wall socket. Remote control Installing the battery • Press the catch and the same time pull out the battery tray.
IPDS-20 Functions iPod / iPhone Music System 1 Power/Battery indicator Power ON/OFF/PLAY/PAUSE button 3 Docking station VOL- button VOL+ button 6 Remote control sensor...
Remote control Remote control transmitter POWER button PREV button 10 ENTER button PLAY/PAUSE button 12 MUTE button VOL- button VOL+ button 15 3D SOUND button 16 MENU button 17 iPod MENU - button NEXT button 19 iPod MENU + button The + button, the - button, the PREV button and the NEXT button function as arrow buttons...
Page 10
iPod/iPhone functions • Place the iPod/iPhone in the docking station. • Switch on the unit. • For iPod touch and iPhone select the iPod mode. • To start playback, press the PLAY/PAUSE button (11) once. • For extended instructions, read the paragraph "iPod functions" further on in this manual. Installing and removing an iPod/iPhone •...
Audio playback During playback, the following functions are available: • To select a track, press the PREV button (9) or the NEXT button (18) until the desired track is set. • To forward or rewind the track, press and hold the PREV button (9) or the NEXT button (18).
Troubleshooting Trouble No sound or incomplete audio No power The operation keys do not work iPod/iPhone Trouble iPod/iPhone volume control does not increase audio volume No response to MENU function. Trouble No sound on the unit system Technical data Power requirements Voltage Input voltage Max power consumption...
Dimensions W x H x D Weight Remote control Power consumption Battery size Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste.
On contract, negligence, strict duality or otherwise. In no event shall Haier be liable, or in any way responsible for any damages or defects in the product which were caused by repairs or attempted repairs performed by anyone other than an authorized service center or dealer;...