Dell PowerConnect 2708 User Manual page 76

Received Bytes (Octets) — Number of octets received on the interface since the system was last
reset. This number includes bad packets and FCS octets, but excludes framing bits.
Received Packets — Number of packets received on the interface, including bad packets, Multicast
and Broadcast packets, since the system was last reset.
Broadcast Packets Received — Number of good Broadcast packets received on the interface since
the system was last reset. This number does not include Multicast packets.
Multicast Packets Received — Number of good Multicast packets received on the interface since
the system was last reset.
CRC & Align Errors — Number of CRC and Align errors that have occurred on the interface since
the system was last reset.
Undersize Packets — Number of undersized packets (less than 64 octets) received on the interface
since the system was last reset.
Oversize Packets — Number of oversized packets (over 1518 octets) received on the interface since
the system was last reset.
Fragments — Number of fragments (packets with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the system was last reset.
Jabbers — The total number of packets received that were longer than 1518 octets (excluding
framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error). The allowed range to detect jabber is between 20 ms and 150 ms.
Collisions — Number of collisions received on the interface since the system was last reset.
Frames of xx Bytes — Number of xx-byte frames received on the interface since the system was last
reset.
Viewing Interface Statistics
Open the RMON Statistics page.
1
Select an interface type and number in the Interface field.
2
The interface statistics are displayed.
76