Dell PowerConnect 2708 User Manual page 56

Figure 6-9. File Download (PowerConnect 2748 Switch Configuration)
Firmware Download — The Firmware file is downloaded. If Firmware Download is selected, the
Configuration Download fields are grayed out.
Configuration Download — The Configuration file is downloaded. If Configuration Download is
selected, the Firmware Download fields are grayed out.
Download via TFTP — Enables initiating an image download via the TFTP server.
Download via HTTP — Enables initiating an image download via the HTTP protocol.
Firmware Download
Server IP Address — The Server IP Address from which the firmware files are downloaded.
Source File Name (1-159 Characters)— Indicates the file to be downloaded.
Destination File Name — The destination file type to which the file is downloaded. The possible
field values are:
Software Image — Downloads the image file.
Boot Code — Downloads the Boot file
NOTE:
nonactive image will become the active image after reset, and then to reset the device following the
download. During the image file download, a dialog box opens which displays the download progress.
The window closes automatically when the download is complete.
56
The image file overwrites the non-active image. It is recommended to designate that the