Hardware Health Event Monitoring Screen - ASROCK 775i65G User Manual

3.4

3.4 Hardware Health Event Monitoring Screen

3.4 Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen
3.4 3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.
Main Advanced
Hardware Health Event Monitoring
CPU Temperature
M / B Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
CPU Quiet Fan
Target CPU Temperature ( C)
Tolerance ( C)
Target Fan Speed
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. If you set this
option as [Disabled], the CPU fan will operate in full speed. If you set this
option as [Enabled], you will find the items "Target CPU Temperature
( C)", "Tolerance ( C)", and "Minimun Fan Speed" appear to allow you
adjusting them. The default value is [Disabled].
Target CPU Temperature ( C)
The target temperature will be between 45 C and 65 C. The default
value is [50].
Tolerance ( C)
The default value of tolerance is [2], which means the error of the
target CPU temperature will be within 2 C.
Target Fan Speed
Use this option to set the target fan speed. You can freely adjust the
target fan speed according to the target CPU temperature that you
choose. The default value is [Fast]. Configuration options: [Fast], [Middle]
and [Slow].
3 4 3 4 3 4
3 4 3 4
BIOS SETUP UTILITY
Boot Security
H/W Monitor
: 45 C / 98 F
: 31 C / 87 F
: 2463 RPM
: N / A
: 1.384V
: 3.306V
: 5.067V
Select Screen
: 11.890V
Select Item
F1 General Help
[Enabled]
F9 Load Defaults
[50]
F10 Save and Exit
[02]
ESC Exit
[Fast]
Exit