Cannot Log In To The Router; Troubleshooting The Isp Connection - NETGEAR DGN2200v1 Setup Manual

Cannot Log in to the Router

If you are unable to log in to the router from a computer on your local network, check the
following:
• If you are using an Ethernet-connected computer, check the Ethernet connection between the
computer and the router as described in the previous section.
• Make sure your computer's IP address is on the same subnet as the router. If you are using the
recommended addressing scheme, your computer's address should be in the range of
192.168.0.2 to 192.168.0.254. Refer to
computer's IP address.
• If your computer's IP address is shown as 169.254.x.x:, it might because recent versions of
Windows and MacOS generate and assign an IP address if the computer cannot reach a DHCP
server. These auto-generated addresses are in the range of 169.254.x.x. If your IP address is in
this range, check the connection from the computer to the router and reboot your computer.
• If your router's IP address was changed and you do not know the current IP address, clear the
router's configuration to factory defaults. This will set the router's IP address to 192.168.0.1.
This procedure is explained in
Router" on page
• Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet
Explorer, click Refresh to be sure the Java applet is loaded.
• Try quitting the browser and launching it again.
• Make sure you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that Caps Lock is off when entering this
information.
If the router does not save changes you have made, check the following:
• When entering configuration settings, be sure to click the Apply button before moving to
another menu or tab, or your changes are lost.
• Click the Refresh or Reload button in the Web browser. The changes may have occurred, but
the Web browser may be caching the old configuration.

Troubleshooting the ISP Connection

If your router is unable to access the Internet, you should check the ADSL connection, then the
Internet TCP/IP connection.
Troubleshooting
"Using the Restore Factory Settings Button to Reset the
34.
"Preparing Your Network" on page 38 to find your
28