User Options
Follow the instructions below to customized the
microwave ovenÕs operation. End-of-cycle signal,
maximum heating time and other options can be
changed to meeting your cooking needs.
1. Open oven door.
¥ If door is closed or STOP/RESET pad is pressed
before finishing programming sequence, oven exits
programming mode.
2. Press and hold pad 2 for approximately 5 seconds.
¥ After 5 seconds, signal sounds. Display shows
ÒOPTIONÓ.
3. Press number pad that matches desired option.
¥ ÒOPÓ represents optional program mode, first number
represents option number and second number
represents functions currently selected for option.
OP:00
OP:01
4-9
4. Press START pad to advance to next option.
See table for options.
5. Press number pad (0,1-3) to change option.
6. Press START pad to save changes.
¥ Repeat steps 4-6 to change additional options.
7. Press STOP/RESET pad or close oven door to exit
programming mode.
Optional Program
Indicator
Number
Pad
Option
Selected